Subscriptions
Get Mail On New Products
News
-
Dental Handpiece Repair Basics
2010-09-27
2010-09-27
Today we will talk about Dental Handpiece repair. Repairing the high speed drill involves replacing the bearings and the "O" rings on the turbine. A thorough cleaning is also required to eliminate corrosion caused by autoclaving.
-
Dental Handpiece Maintenance Guide With a Focus on the High Speed Drill and Chuck
2010-10-19
2010-10-19
Over the years I have seen many web pages and read many articles on high-speed handpiece maintenance. Most are very similar, however as I talk to dentists and hygienists I am finding varied methods of maintenance. It is my intention to offer my experience on handpiece maintenance and hopefully save you some money.
-
High-speed handpiece maintenance
2010-10-27
2010-10-27
Based on my experience and conversations with various repair professionals there are five basic steps for high-speed handpiece maintenance. We have already covered two.
-
The dental handpieces are pointed out with particularity
2010-12-01
2010-12-01
The various features of novelty which characterize the dental handpieces are pointed out with particularity in the claims annexed to and forming a part of the disclosure.
-
Dental handpiece having means for opening and closing a chuck
2010-12-07
2010-12-07
Dental handpiece having means for opening and closing a chuck. A device for opening and closing a chuck for a dental handpieces has a handle portion and a powerhead assembly including a hollow driving shaft having, adjacent to its outer orifice, a forwardly outwardly tapering portion defining a small diameter rear portion and a large diameter front portion.
-
To understand current status of the uses of dental handpieces
2010-12-13
2010-12-13
To understand current status of the uses of dental handpieces, methods of disinfection and sterilization and their effectiveness in dental-care hospitals and out-patient departments of stomatology in general hospitals.
-
A modular reduction gear for a dental handpiece
2010-12-20
2010-12-20
A modular reduction gear for dental handpieces comprises an input shaft coupled to the driving motor and provided with a pinion constituting the sun wheel of an epicyclic gear of which the planet carrier is rigid with the adjacent end of the output shaft transmitting the rotary motion to the dental instrument.
-
The creation of dental parts
2010-12-27
2010-12-27
Some of the duties of dental assistants will perform include support to dental treatment, the creation of dental parts, fill the performance of the X-ray and laboratory work.
